- Launch the UniFi Controller and click on Launch a Browser to Manage the Network. Click on Devices and locate the UniFi Security Gateway. Click on the UniFi Security Gateway and then click Configuration from the right panel.
- Tcpdump -npi eth8 dst port 443 and host IPADDRESSHERE WAN 2. Tcpdump -npi eth9 dst port 443 and host IPADDRESSHERE For further support please reach out to the UniFi Support Team. Related Articles. UniFi - USG Port Forward: Port Forwarding Configuration and Troubleshooting.
What is My External IP all about?
A suite of network tools including WAN IP Address properties, and reverse DNS lookup. Home Reverse DNS Lookup Contact. Your WAN IP Information: IP Address: 126.96.36.199 Host: msnbot-40-77-167-89.search.msn.com: Welcome to IPmotivation! Free Tools for WAN IP.
Every device connected to a network which uses the Internet Protocol has an unique IP address assigned to it. The global pool of such interconnected networks is known the internet.
Sometimes, when looking at it from the outside of the network, the IP address of a device seems to be different from the one assigned in the original (sub)network. This is due some mechanisms such as NAT.
My External IP displays the IP address of the device as it seems from the outside (hence external).
News / New Features
- 2016-07-10 Added: Show RIPE information about the IP number.
- 2015-10-30 Added: FreeBSD fetch sample.
- 2015-08-03 Added: AutoHotkey sample.
- 2015-02-23 Added: Erlang and Elixir samples
I switched on ipv4.myexternalip.com which answers only to requests coming in via IPv4. ipv6.myexternalip.com will do the same for IPv6. This might come in handy when you test your setup or toy around with IPv6.
Btw: Happy 2015!
Here are some clever uses of myexternalip.com I've seen in the wild:
- JSON: http://myexternalip.com/json
- JSON-P: http://myexternalip.com/json?jsonp=yourCallback
Flattr: I created a flattr-account and start accepting donations (small, big, does not matter). If you want to donate by other means: contact me.
Throttle: some folks out there have either running curl in a while-loop or a crazy understanding of how often their external ip changes or they need some tool to help keeping a line busy. Whatever the case might be: 20+ requests / second is way too often and thus I decided to throttle the answer a little bit. The good folks among you won't hardly notice it at all, the . strange . folks might.
Usually this service runs very low profile and without much handholding. Recently I watched at the load and then on some logs and on some more logs and on some tcpdumps: One machine out there wanted to know it's IP at the rate of ~ 100 times a second. Heart-warming. Especially when the IP does not change at all. And especially when the user agent looks like '/tmp/.botc3 / 82d7f55ef6a49ab4e49d89caa5ea10ba'
So, the new access rate for everyone is around 1/s.
And you, young fella at 118.175.31.x .. you are banned! :)
'My External IP' can be reached via IPv6 now as well.
With IPv6 the whole NATting is kind of pointless and most devices will have a 'real' IP address with IPv6 but you still can use myexternalip.com to check if your network works as expected.
Looks like you are using IPv4.
Whenever you HEAD http://myexternalip.com, you will find your IP will be there (hint: in the 'my-external-ip' header)!
Checkout some of the examples on how to make use of that feature
How to use My External IP - API
So, how to use this site in your environment (other than just surfing it with a browser)?
What's My Wan Ip Address
Rate limit: if you exceed the rate limit of 30 requests/minute, you will receive status code 429 If you continue to exceed that limit and start to annoy me you will get banned at the IP filter level. Sorry, but I do not see the need to retrieve the IP more than maybe once every minute, 30 requests per minute is good will on my behalf.
- Max-length: 64
- Begins with [_a-zA-Z]
- Continues with [_a-zA-Z0-9]
Here is a list of ideas to get you started:
- BITS (Windows only)
- Powershell 2.0 (Windows only)
to quote from the homepage of 'curl':
curl is a command line tool for transferring data with URL syntax, supporting FTP, FTPS, HTTP, HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP, LDAPS, FILE, IMAP, SMTP, POP3, RTMP and RTSP. curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, kerberos..), file transfer resume, proxy tunneling and a busload of other useful tricks.
to quote from the homepage of 'wget':
GNU Wget is a free software package for retrieving files using HTTP, HTTPS and FTP, the most widely-used Internet protocols. It is a non-interactive commandline tool, so it may easily be called from scripts, cron jobs, terminals without X-Windows support, etc.
to quote from the homepage of 'fetch':
fetch -- retrieve a file by Uniform Resource Locator
Get My Wan Ip
often cited as the 'Swiss Army Knife for TCP/IP' you can use netcat to obtain your external ip. this approach also works with netcat-alikes such as socat or even with telnet:
Show My Wan Ip
NETCAT, HEAD method
just like the regular netcat version, just ask the server to deliver just the HEAD-information
Powershell is the replacement for the 'old' cmd.exe, it is a builtin of the Windows OS since Windows7 and Windows Server 2008 R2. It is also available as an additional feature for WindowsXP, WindowsVista and Windows Server.
BITS stands for 'Background Intelligent Transfer Service', it is a builtin tool of the Windows OS.
NodeJS + request
Python with 'request', HEAD method
Elixir - HTTPoison
If you wish to contact us, please mail to [email protected]